Electric Precision Screwdriver Set 52 Bits OLED Display USB-C for Electronics Repair

Precision work punishes the wrong tool. Too much torque and you strip a tiny screw. Too little and nothing moves. This set is built for exactly that — it gives you control over small fasteners without the guesswork. The OLED screen means you always know your torque setting and battery level at a glance.

Specifications

• Total pieces: 57 (screwdriver + 52 bits + accessories)
• Bit count: 52 (12 long + 40 short, 1/4 inch hex shank)
• Bit material: Alloy steel, heat-treated, magnetic tips
• Motor speed: 160 RPM
• Torque (electric): 3 settings — 0.1 / 0.2 / 0.3 N·m
• Torque (manual): Up to 3 N·m
• Battery: 500mAh lithium-ion, built-in
• Charging port: USB-C (cable included)
• Display: OLED screen — shows torque level and battery status
• Work light: Built-in LED, activates automatically
• Housing material: ABS engineering-grade plastic
• Color: Gray

What Makes It Useful

OLED Display — Know Your Settings at a Glance

The small screen shows your current torque level and remaining battery life while you work. No guessing, no stopping to check — you know exactly when it is time to charge or switch settings.

Three Electric Torque Levels for Delicate Work

The three settings (0.1, 0.2, and 0.3 N·m) are designed for precision tasks where too much force can strip a thread or crack a housing. Start at the lowest level and step up only if needed. Manual mode reaches up to 3 N·m for anything that needs a firmer grip.

52 Alloy Steel Bits — Magnetic, Heat-Treated

You get 52 bits in two lengths (12 long, 40 short), covering Phillips, Slotted, Hex, and Torx — the four types you will encounter in most electronics and small device repairs. The magnetic tips hold the bit in place and help guide screws into position.

Built-In LED for Close Work

The integrated light turns on automatically, aimed directly at your work area. Useful for phone repairs, laptop work, or anything under a bench where overhead lighting falls short.

USB-C Charges from Any Standard Port

Plug into a laptop, wall adapter, or power bank. No special charger needed. The 500mAh battery is enough for several jobs in regular use — ideal if this lives in your desk drawer or tech repair bag.

Pop-Up Magnetic Case — Everything Stays Organized

The case opens with a push and holds all 52 bits in place securely. Nothing gets loose, nothing gets lost. Compact enough to keep in a backpack pocket or tool drawer. All bits have a standard 1/4 inch hex shank and magnetic tips.

Bit types included:

• Phillips (PH): PH000, PH00, PH0, PH1, PH2 — covers phones, laptops, eyeglasses, appliances
• Slotted (SL): multiple sizes for flat-head screws
• Hex (H): H0.9 through H3 — common in electronics and bicycle components
• Torx (T): T2 through T20 — used in most modern smartphones and laptops

What People Use It For

• Phone and tablet screen replacement or battery swap
• Laptop disassembly for RAM, SSD, or cooling maintenance
• Watch and small wearable band strap adjustment
• Eyeglasses tightening and frame repair
• Game console and controller repair
• Small home appliance maintenance
• Hobby electronics and DIY assembly
• Gift for a tech-savvy friend or family member

This tool is designed for precision electronics work and light repair tasks. It is not intended for furniture assembly, construction fastening, or any application requiring torque above 3 N·m.

Questions People Ask Before Buying

Is the torque low enough to safely open a phone without stripping screws?

Yes. The lowest setting (0.1 N·m) is suitable for the small screws found in most smartphones and tablets. Start at the lowest level and only go higher if the screw does not move.

What does the OLED display actually show?

It shows the current torque setting (1, 2, or 3) and a battery indicator. You can glance at it without stopping work — useful when mid-repair and you do not want to lose focus.

How long does the battery last?

For typical precision repair sessions — phone, laptop, small electronics — the 500mAh battery provides enough runtime for several jobs on a single charge. It is sized for regular hobbyist and technician use, not continuous all-day industrial work.

Can I use the bits with other 1/4 inch drivers?

Yes. The bits use the standard 1/4 inch (6.35mm) hex shank, so they fit any driver that accepts standard 1/4 inch bits.

Does it work in manual mode without power?

Yes. You can use it as a standard manual screwdriver regardless of battery level. Manual mode allows up to 3 N·m of torque, which handles most small and medium fasteners.

Is this a good gift?

It is a practical choice for anyone who works on phones, laptops, or small electronics — whether they are a hobbyist, a student, or someone who just likes fixing things around the house. The case presentation is clean and compact.

What's in the Box

• 1x Electric precision screwdriver (Gray, USB-C rechargeable)
• 52x Alloy steel magnetic bits — 12 long + 40 short (1/4 inch hex shank)
• 1x Pop-up magnetic storage case
• 1x USB-C charging cable
• 1x Instruction manual

Battery Indicator Guide

• OLED shows current torque level (1, 2, or 3) and battery bar in real time
• Charge via USB-C when battery bar is low — takes approximately 60 to 90 minutes
• Do not use while the charging cable is connected
• If stored unused for several months, charge before use to maintain battery health